CCTV Surveillance System

The CCTV Surveillance System is located within the Analysis tab of the Fuzor App Menu. The Alt +C hotkey opens the CCTV App. Use it to plan out how and where to place your security cameras to make sure that you have full coverage of a building. This system allows you to look through the perspective of the security cameras you have placed. You can specify the type of camera using the drop down menus on the top. A camera can either be in color or black and white mode.

The Place By Click button allows you to select a place for a camera to appear.

The Enter CCTV button opens the CCTV menu.

The Display CCTV Frustums check box toggles whether the camera view bounds are shown in the 3D view.

The Save button saves your current camera scheme.

The Load button opens a file browser for you to select a saved camera scheme.

The CCTV Menu allows you to select different camera views and look around through them as if you were monitoring your building from security cameras. From this menu it is easy to tell if there are any blind spots in your setup. Additionally, any cameras that were specified as black and white will appear this way in this view. While in this menu hold down the right mouse button to pan the camera around to see the full view range of the camera you are viewing. To see the perspective of another camera simply select it in the CCTV camera list. You can also edit the Chip Size and Focal Length of the camera for more precise simulation of your systems. Double click the camera name in the CCTV list to rename it. You can find the current camera in the 3D view by clicking the go to camera button.